Journal Publications

  2019
150 A. Benken, Y. Gianchandani, “Passive Wireless Pressure Sensing for Gastric Manometry,” in review, MDPI Micromachines; Section B: Biology; Implantable Microdevices, Vol. II, micromachines-647439, published online Nov. 4, 2019, Volume 10, Issue 12, December 2019, Featured Paper
149 H. Jeong, H. Shin, J. Yi, Y. Park, J. Lee, Y. Gianchandani, J. Park, “Size-based Analysis of Extracellular Vesicles Using Sequential Transfer of an Evaporating Droplet,” Lab on a Chip, published online, June 3, 2019, doi: 10.1039/C9LC00526A
148 J. Jiang, S. Green, Y. Gianchandani, “Thermoformed Liquid Crystal Polymer Packages for Magnetoelastic Frame-Suspended Resonators,” IEEE Journal of Microelectromechanical Systems, published online April 12, 2019, doi: 10.1109/JMEMS.2019.2904711, Featured Article, July 2019
  2018
147 J. Jiang, R. Nambisan, S. Green, Y. Gianchandani, “Encapsulation Approaches for In-Stent Wireless Magnetoelastic Sensors,” IEEE Transactions on Biomedical Engineering, pp. 1-13 Online ISSN 1558-2531, published online Nov. 21, 2018, doi: 10.1109/TBME.2018.2882415
146 S. Deng, S. Green, Y. Gianchandani, “A 3-D Printed Miniature Magnetron Gauge for Ultra-High Vacuum Environments,” Vacuum, #VAC_2018_979, published online July 27, 2018, doi: 10.1016/j.vacuum.2018.07.039
145 H. Jeong, C. Han, S. Cho, Y. Gianchandani, J. Park, “Analysis of Extracellular Vesicles Using Coffee Ring,” ACS Applied Materials & Interfaces, vol. 10(27), pp 22877-22882, June 2018, doi: 10.1021/acsami.8b05793
144 S. Deng, S. Green, Y. Gianchandani, “A Micromachined Magnet-less RF Electron Trap,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 27(3), pp. 487-496, May 2018, doi: 10.1109/JMEMS.2018.2818944
143 X. Luo, Y. Gianchandani, “A Microdischarge-Based Pressure Sensor Fabricated Using Through-Wafer Isolated Bulk-Silicon Lead Transfer,” IEEE/ASME Journal of Microelectromechanical Systems, 27(2), pp. 365-373, April 2018, ISSN 1057-7157, published online Feb. 28, 2018, ISSN 1941-0158, doi: 10.1109/JMEMS.2018.2805772, Highlighted as JMEMS RightNow Paper
  2017
142 M. Choi, Y. Sui, R. Meredith, Y. Ma, G. Kim, D. Blaauw, Y. Gianchandani, T. Li, “Autonomous Microsystems for Downhole Applications: Design Challenges, Current State, and Initial Test Results,” Sensors, 17-02190, Sep. 23, 2017, doi: 10.3390/s17102190
141 S. Deng, S. Green, A. Markosyan, M. Kushner, Y. Gianchandani, “A Miniaturized Magnet-less RF Electron Traps: II. Experimental Verification,” Journal of Vacuum Science and Technology – A, 35(4), paper 042002 (9 pp.), Jul/Aug 2017, doi: 10.1116/1.4984752
140 A. Markosyan, S. Green, S. Deng, Y. Gianchandani, M. Kushner, “A Miniaturized Magnet-less RF Electron Trap: I. Modeling and Analysis,” Journal of Vacuum Science and Technology – A, 35(4), paper 042001 (9 pp.), Jul/Aug 2017, doi: 10.1116/1.4984751
139 V. Pepakayala, S.R. Green, Y. Gianchandani, “Wireless Strain Measurement Using Ringdown Frequency Locking on a Micromachined Magnetoelastic Resonator,” ISSS Journal for Micro and Smart Systems, Springer, published on-line Feb. 25, 2017, doi: 10.1007/s41683-017-0001-3
  2016
138 V. Pepakayala, K. Goeckner, J. Nervina, Y. Gianchandani, S. Kapila, “Three-dimensional Force Measurements During Rapid Palatal Expansion in Sus Scrofa,” MDPI Micromachines, 7, 64 (11 pp.), April 12, 2016, doi:10.3390/mi7040064
137 X. Luo, Y. Gianchandani, “A 100-µm Diameter Capacitive Pressure Sensor with 50-MPa Dynamic Range,” IEEE/ASME Journal of Micromechanics and Microengineering, 26, 045009 (10 pp.),published online Feb. 10, 2016, doi:10.1088/0960-1317/26/4/045009
136 Y. Ma, T. Li, Y. Gianchandani, “A Low Temperature Batch Mode Packaging Process for Submillimeter Microsystems in Harsh Environment Applications,” IEEE Transactions on Components, Packaging and Manufacturing Technology,6(3), March 2016, pp. 366-372
135 Y. Qin, Y. Gianchandani, “A Fully Electronic Microfabricated Gas Chromatograph with Complementary Capacitive Detectors for Indoor Pollutants,” Nature Microsystems and Nanoengineering, Feb. 29, 2016, 2, 15049 (11 pp.), 2, 15049; doi:10.1038/micronano.2015.49, Featured Article for March 2016
  2015
134
V. Pepakayala, J. Stein, Y. Gianchandani, “Resonant Magnetoelastic Microstructures for Wireless Actuation of Liquid Flow on 3D Surfaces and Application to Glaucoma Drainage Implants,” Sep. 12, 2015, Nature Microsystems and Nanoengineering, 15032 (9 pp.); doi:10.1038/micronano.2015.32, Featured Article for Dec. 2015
133
Y. Qin, S. An, Y. Gianchandani, “Arrayed Architectures for Multi-stage Si-Micromachined High-Flow Knudsen Pumps,” Journal of Micromechanics and Microengineering, Sep. 3, 2015, JMM-101564 (10 pp.); published on-line, Oct. 15, 2015, doi:10.1088/0960-1317/24/6/065011, Featured on cover of issue
132
S. An, Y. Qin, Y. Gianchandani, “A Monolithic High-Flow Knudsen Pump Using Vertical Al2O3 channels in SOI,” IEEE/ASME Journal of Microelectromechanical Systems, JMEMS-2014-0367, April 22, 2015, in press
131
M. Rais-Zadeh, J. Fox, D. Wentzloff, Y. Gianchandani, “Reconfigurable Radios: A Possible Solution to Reduce Entry Costs in Wireless Phones,” Proceedings of the IEEE, 0154-SIP-2014-PIEEE, 103(3), pp. 438-451
130
R. Malhotra, Y. Gianchandani, “A Microdischarge-Based Neutron Radiation Detector Utilizing a Stacked Arrangement of Micromachined Steel Electrodes with Gadolinium Film for Neutron Conversion, IEEE Sensors Journal, Sensors-10242-2014, Jan. 20, 2015, 15(7), pp. 3863-3870
129
R. Malhotra, Y. Gianchandani, “A Gamma Radiation Detector with Orthogonally Arrayed Micromachined Electrodes, IEEE/ASME Journal of Microelectromechanical Systems, JMEMS-2014-0333, published on-line February 6, 2015
128
J. Qu, J. Tang, Y. Gianchandani, K. Oldham, S. Green, “Dynamic Modeling of a Bidirectional Magnetoelastic Rotary Micro-Motor” Sensors & Actuators: A. Physical, 223, pp. 49-60, March 2015, published on-line Jan. 17, 2015, doi: 10.1016/j.sna.2014.12.029
127
J. Tang, S. Green, Y. Gianchandani, “A Fabrication Process for the Monolithic Integration of Magnetoelastic Actuators and Silicon Sensors,” Journal of Micromechanics and Microengineering, vol. 25, no. 4, 9 pp. paper 045001, February 2015
126
H. Jeong, T. Li, Y. Gianchandani, J. Park, “High Precision Cell Slicing by Harmonically Actuated Ultra-sharp SixNy Blades,” Journal of Micromechanics and Microengineering, 25(2), Feb 1, 2015, 9 pp., paper 025007
125
A. Viswanath, T. Li, Y. Gianchandani, “JMEMS Letters: Batch Mode Micro Ultrasonic Machining (µUSM) Using Workpiece Vibration,” IEEE/ASME Journal of Microelectromechanical Systems,24(1), pp. 1-3, Feb. 2015, doi: 10.1109/JMEMS.2014.2364261
 
2014
124
Y. Ma, Y. Sui, T. Li, Y. Gianchandani, “A Sub-Millimeter Package for Microsystems in High Pressure and Salinity Downhole Environments,” IEEE/ASME Journal of Microelectromechanical Systems, JMEMS-2014-0108, September 2014, Vol. 24(4), pp. 861-869, August 2015
123
S. Nayake, H. Sugimoto, N.K. Gupta, Y.B. Gianchandani, “Thermally Enhanced Membrane Gas Separation,” European Journal of Mechanics-B/Fluids, Elsevier, Vol. 49, Part A, pp. 36-49, Jan. 2015, published online July 2014, doi: 10.1016/j.euromechflu.2014.07.004
122
C. Liang, C. P. Gooneratne, Q. X. Wang, Y. Gianchandani, J. Kosel, “Magnetic Properties of Fe-Ni-Based Thin Film Materials with Different Additives,” MDPI Biosensors, 4, pp. 189-203, January 2014, published on-line, July 4, 2014, doi:10.3390/bios4030189
121
A. Viswanath, T. Li, Y. Gianchandani, “High Resolution Micro Utrasonic Machining (HR-µUSM) for trimming 3-D Microstructures,” Journal of Micromechanics and Microengineering,vol. 24, no. 6, June 2014
120
Y. Qin, Y.B. Gianchandani, “iGC2: an architecture for micro gas chromatographs utilizing integrated bi-directional pumps and multi-stage preconcentrators”, Journal of Micromechanics and Microengineering, vol. 24, paper 065011, pp. 1-10, 2014, DOI: 10.1088/0960-1317/24/6/065011
119
J. Tang, S. Green, Y. Gianchandani, “Scalable, High-Performance Magnetoelastic Tags Using Frame-Suspended Hexagonal Resonators,” Journal of Micromechanics and Microengineering, vol. 24, no. 6, June 2014
118
V. Pepakayala, S. Green, Y. Gianchandani, “Passive, Wireless Strain Sensors Using Microfabricated Magnetoelastic Beam Elements,” IEEE/ASME Journal of Microelectromechanical Systems, JMEMS-2013-0330, vol. 23, pp. 1374-1382, December 2014, published on-line, April 2014, doi: 10.1109/JMEMS.2014.2313809
117
C. Eun, X. Luo, J.-C. Wang, Z. Xiong, M. Kushner, Y. Gianchandani, “A Microdischarge-Based Monolithic Pressure Sensor,IEEE/ASME Journal of Microelectromechanical Systems, vol. 23, pp. 1300-1310, December 2014, doi: 10.1109/JMEMS.2014.2312174
116
Y. Qin, Y.B. Gianchandani, “iGC1: An Integrated Fluidic System for Gas Chromatography Including Knudsen Pump, Preconcentrator, Column, and Detector Microfabricated by a Three-Mask Process,” Journal of Microelectromechanical Systems, 2014, DOI: 10.1109/JMEMS.2014.2306652
  2013
115
T. Li, K. Visvanathan, Y.B. Gianchandani, “A Batch Mode Micromachining Process for Spherical Structures,” Journal of Micromechanics and Microengineering, vol. 24, no. 2, February 2014, published on-line, Dec. 23, 2013, doi: 10.1088/0960-1317/24/2/025002
114
S. An, N. Gupta, Y. Gianchandani, “Vacuum sealing using atomic layer deposition of Al2O3 at 250°C,” Journal of Vacuum Science and Technology – A, vol. 32, no 1, January 2014, published on-line September 5, 2013, DOI: 10.1116/1.4820240
113
S. An, Y. Gianchandani, “A Dynamic Calibration Method for Pirani Gauges Embedded in Fluidic Networks,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 23, no. 3, pp. 699-709, January 2014
112
S. An, N. Gupta, Y. Gianchandani, “A Si-Micromachined 162-Stage Two-Part Knudsen Pump for On-Chip Vacuum,” IEEE/ASME Journal of Microelectromechanical Systems, JMEMS-2013-0138, 23(2), pp. 406-416, January 2014, published on-line Sept. 25, 2013, DOI: 10.1109/JMEMS.2013.2281316, Highlighted as JMEMS RightNow Paper
111
E. Hendarto, Y.B. Gianchandani, “Thermocapillary Actuation of Millimeter-Scale Rotary Structures,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 23, no. 2, pp. 494-499, January 2014
110
T. Li, Q. Bai, Y.B. Gianchandani, “High Precision Batch Mode Micro Electro Discharge Machining of Metal Alloys Using DRIE Silicon as a Cutting Tool,” Journal of Micromechanics and Microengineering, 23, 2013, paper 095026, pp. 1-11, published on-line August 28, 2013, doi:10.1088/0960-1317/23/9/095026
109
S. Green, R. Kwon, G. Elta, Y. Gianchandani, “In Vivo and In Situ Evaluation of a Wireless Magnetoelastic Sensor Array for Plastic Biliary Stent Monitoring,” Biomedical Microdevices, 15(3), pp. 509-517, June 2013, DOI: 10.1007/s10544-013-9750-3
108
E. Hendarto, Y. Gianchandani, “Size sorting of floating spheres based on Marangoni forces in evaporating droplets,” Journal of Micromechanics and Microengineering, 23 (7), paper 075016, pp. 1-7, published on-line June 10, 2013, doi:10.1088/0960-1317/23/7/075016
107
X. Luo, Y. Gianchandani, “A Pulsed High Voltage Generator Utilizing a Monolithic PZT Element and Evaluation of Nonlinear Piezoelectric Behavior in Transient Mode,” Journal of Microelectromechanical Systems, 22(4), pp. 930-937, August 2013, DOI: 10.1109/JMEMS.2013-2250487
106
E. Hendarto, T. Li, Y. Gianchandani, “Investigation of wine glass mode resonance in 200-μm-diameter cenosphere-derived borosilicate hemispherical shells,” Journal of Micromechanics and Microengineering, 23, 2013, paper 055013, pp. 1-6, published on-line April 3, 2013, doi:10.1088/0960-1317/23/5/055013
105
J. Tang, S.R. Green, Y. Gianchandani, “Miniature Wireless Magnetoelastic Resonant Motor with Frequency Selectable Bi-Directional Rotation,” Journal of Microelectromechanical Systems, 22(3), pp. 730-8, June 2013, DOI: 10.1109/JMEMS.2013.2242253
104
A. Viswanath, S.R. Green, J. Kosel, Y. Gianchandani, “Metglas-Elgiloy Bi-Layer, Stent Cell Resonators for Wireless Monitoring of Viscosity and Mass Loading,” Journal of Micromechanics and Microengineering, 23, 2013, paper 025101, pp. 1-9, published on-line Dec. 21, 2012, doi:10.1088/0960-1317/23/025010
  2012
103
C. Liang, C. Gooneratne, D. Cha, L. Chen, Y. Gianchandani, J. Kosel, “Development of FeNiMoB Thin Film Materials for Microfabricated Magnetoelastic Sensors,” Journal of Applied Physics, 112, paper 113912, pp. 1-8, published on-line Dec. 7, 2012, DOI 10.1063/1.4768458
102
S. Green, R. Malhotra, Y. Gianchandani, “Sub-Torr Chip-Scale Sputter-Ion Pump Based on a Penning Cell Array Architecture,” IEEE/ASME Journal of Microelectromechanical Systems, in press, Sept. 13, 2012, pp. 1-9, DOI 10.1109/JMEMS.2012.2221159
101
N. Gupta, S. An, Y. Gianchandani, “A Si-micromachined 48-stage Knudsen pump for on-chip vacuum,Journal of Micromechanics and Microengineering, 22, 2012, paper 105026, pp. 1-8, doi:10.1088/0960-1317/22/10/105026
100
S.A. Wright, H.Z. Harvey, Y.B. Gianchandani, “A Microdischarge-Based Deflecting-Cathode Pressure Sensor in a Ceramic Package,IEEE/ASME Journal of Microelectromechanical Systems, in press, Aug. 17, 2012, pp. 1-7 DOI 10.1109/JMEMS.2012.2215009
99
T. Li, A.T. Evans, S. Chiravuri, R.Y. Gianchandani, Y.B. Gianchandani, “Compact, Power-Efficient Architectures Using Microvalves and Microsensors, for Intrathecal, Insulin, and Other Drug Delivery Systems,” Advanced Drug Delivery Reviews, 64, pp. 1639-1649, published on-line May 22, 2012, DOI: 10.1016/j.addr.2012.05.002 (invited paper)
98
J. Liu, M.K.K. Oo, K. Reddy, Y.B. Gianchandani, J.C. Schulz, H.M. Appel, X. Fan, “Adaptive Two-Dimensional Microgas Chromatography,” Analytical Chemistry, 84 (9), pp. 4214–4220, April 2, 2012 (Web), DOI: 10.1021/ac300588z
97
F.M. Ozkeskin, S. Choi, K. Sarabandi, Y.B. Gianchandani, “Batch Fabricated High-Power RF Microrelays with Direct On-PCB Packages,” IEEE/ASME Journal of Microelectromechanical Systems, 21(4), pp. 990-1001, August 2012, DOI: 10.1109/JMEMS.2012.2194772
96
F.M. Ozkeskin, S. Choi, K. Sarabandi, Y.B. Gianchandani, “An All-Metal Micro-Relay with Bulk Foil Pt-Rh Contacts for High Power RF Applications,” IEEE Transactions on Microwave Theory and Techniques, 60(6), June 2012, pp. 1595-1604, DOI: 10.1109/TMTT.2012.2192744
95
F.M. Ozkeskin, Y.B. Gianchandani, “Micromachined Pt-Rh and Stainless Steel Relays for High Power DC Applications,” Sensors and Actuators, January 2012, published on-line 2-9-12, pp. 1-8, DOI:10.1016/j.sna.2011.12.033
94
C.K. Eun, Y. Gianchandani, “Microdischarge-Based Sensors and Actuators for Portable Microsystems: Selected Examples,” IEEE Journal of Quantum Electronics, 48(6), pp. 814-826, June 2012 (invited paper)
93
A. Alfadhel, Y. Gianchandani, J. Kosel, “Microfabrication of Magnetostrictive Beams Based on NiFe Film Doped with B and Mo for Integrated Sensor Systems,” Journal of Applied Physics, 111(7), 07E515, April 1, 2012, 3 pages, DOI: 10.1063/1.3679016
  2011
92
K. Visvanathan, Y.B. Gianchandani, “Locomotion response of airborne, ambulatory and aquatic insects to thermal stimulation using piezoceramic microheaters,” IOP Journal of Micromechanics and Microengineering, 21, Nov. 2011, paper 125002, pp. 1-9
91
E. Hendarto, Y.B. Gianchandani, “A Non-Contact Method for Spatially Localized Precipitation of Liquid Suspensions Using Marangoni Forces,” IOP Journal of Micromechanics and Microengineering, 21, paper 115028, pp. 1-7, DOI:10.1088/0960-1317/21/11/115028, published on-line, Oct. 25, 2011
90
K. Visvanathan, T. Li, Y.B. Gianchandani, “A Biopsy Tool with Integrated Piezoceramic Elements for Needle Tract Cauterization and Cauterization Monitoring,Biomedical Microdevices, in press, 8-22-11
89
N. Gupta, Y.B. Gianchandani, “Porous Ceramics for Multistage Knudsen Micropumps–Modeling Approach and Experimental Evaluation,” IOP Journal of Micromechanics and Microengineering, 21, Aug. 2011, paper 095029, pp. 1-14, DOI: 10.1088/0960-1317/21/9/095029
88
K. Visvanathan and Y. B. Gianchandani, “Microheaters Based on Ultrasonic Actuation of Piezo Ceramic Elements,” IOP Journal of Micromechanics and Microengineering, Vol. 21, pp. 085030, July 2011.
87
J. Liu, N.K. Gupta, K.D. Wise, Y.B. Gianchandani, X. Fan, “Demonstration of motionless Knudsen pump based micro-gas chromatography featuring micro-fabricated columns and on-column detectors,Lab-on-a-Chip, in press, 7-29-11
86
H. Rowais, B. Li, C. Liang, S. Green, Y. Gianchandani, and J. Kosel, “Development of a passive and remote magnetic micro sensor with thin-film giant magnetoimpedance element and surface acoustic wave transponder,” J. Appl. Physics special issue for the 55th Annual Conference on Magnetism and Magnetic Materials (MMM 2010), Atlanta, GA, in press, Dec. 2010
85
C. Eun, Y.B. Gianchandani “A Wireless-Enabled Microdischarge-Based Radiation Detector Utlizing Stacked Electrode Arrays for Enchanced Detection Efficiency,” IEEE/ASME J. Microelectromechanical Systems, 20(3), pp. 636-643, June 2011
84
W. Zhu, J.M. Park, M.J. White, G.F. Nellis, Y.B. Gianchandani, “Experimental Evaluation of an Adaptive Joule-Thomson Cooling System Including Silicon-Microfabricated Heat Exchanger and Microvalve Components,” Journal of Vacuum Science and Technology – A, 021005, January 2011
83
A.T. Evans, S. Chiravuri, Y.B. Gianchandani, “A Multi-Drug Delivery System Using a Piezoelectrically Actuated Silicon Valve Manifold with Embedded Sensors,” IEEE/ASME J. Microelectromechanical Systems, 20(1), pp. 231-238, February 2011
82
C. Eun, Y.B. Gianchandani, “A Microfabricated Steel and Glass Radiation Detector with Inherent Wireless Signaling,” IOP Journal of Micromechanics and Microengineering, 21(1), Jan. 2011, paper 015003, pp.1-10, DOI: 10.1088/0960-1317/21/1/015003
81
N. Gupta, Y.B. Gianchandani, “Thermal Transpiration in Mixed Cellulose Ester Membranes: Enabling Miniature, Motionless, Gas Pumps,” Microporous and Mesoporous Materials, 142, pp. 535-541, January 2011
  2010
80
C. Eun, R. Gharpurey, Y.B. Gianchandani, “Wireless Signaling of Beta Detection Using Micro-Discharges,” IEEE/ASME J. Microelectromechanical Systems, 19(4), pp. 785-793, August 2010
79
S. Green, Y.B. Gianchandani, “Tailored Magnetoelastic Sensor Geometry for Advanced Functionality in Wireless Biliary Stent Monitoring Systems,” IOP Journal of Micromechanics and Microengineering, 20(7), July 2010, paper 075040, pp. 1-13, online June 28, 2010, DOI 10.1088/0960-1317/20/7/075040
78
A.T. Evans, Y.B. Gianchandani, “Note: A Low Leakage Liquid Seal for Micromachined Gas Valves,” Review of Scientific Instruments, vol. 81, paper 066105, pp. 1-3, published online June 24, 2010
77
S. Green, R. Kwon, G. Elta, Y.B. Gianchandani, “In Situ and Ex Vivo Evaluation of a Wireless Magnetoelastic Bilary Stent Monitoring System,” Biomedical Microdevices, 12(3), pp. 477- 484, online Feb. 2010, DOI 10.1007/s10544-010-9404-7
76
A. Basu, Y.B. Gianchandani, “Microfluidic Doublets in Aqueous Samples Generated by Microfabricated Thermal Probes,” Sensors and Actuators A: Physical, 158(1), pp. 116-120, March 2010
75
M.J. White, G.F. Nellis, S.A. Klein, W. Zhu, Y. Gianchandani, “An Experimentally Validated Numerical Modeling Technique for Perforated Plate Heat Exchangers,” Journal of Heat Transfer, vol. 132, iss. 11, Nov. 2010, article 111801, pp. 1-9, published on-line Aug. 10, 2010, DOI: 10.1115/1.4000673
74
A.T. Evans, S. Chiravuri, Y.B. Gianchandani, “A Low Power Microvalve Regulated Architecture for Drug Delivery Systems,” Biomedical Microdevices, Springer, 12(1), pp. 159-168, February 2010
73
A.T. Evans, S. Chiravuri, Y.B. Gianchandani, “Transdermal Power Transfer for Recharging Implanted Drug Delivery Devices Via the Refill Port,” Biomedical Microdevices, Springer, 12(2), p. 179-185, April 2010 DOI 10.1007/s10544-010-9397-2 (erratum: DOI 10.1007/s10544-010-9397-2)
72
M. Richardson, Y.B. Gianchandani, “Wireless Monitoring of Workpiece Material Transitions and Debris Accumulation in Micro-Electro-Discharge Machining,” IEEE/ASME J. Microelectromechanical Systems, 19(1), pp. 48-54, February 2010
71
W. Zhu, M.J. White, G.F. Nellis, S.A. Klein, Y.B. Gianchandani, “A Si/Glass Bulk Micromachined Cryogenic Heat Exchanger for High Heat Loads: Fabrication, Test and Application Results,” IEEE/ASME J. Microelectromechanical Systems, 19(1), pp. 38-47, February 2010
  2009
70
T. Li, A. Barnett, K.L. Rogers, and Y.B. Gianchandani, “A Blood Sampling Microsystem for Pharmacokinetic Applications: Design, Fabrication, and Initial Results,” Lab-on-a-Chip, Vol. 9, pp. 3495-3503, December 2009
69
A. Basu and Y.B. Gianchandani, “A Programmable Array for Contact-Free Manipulation of Floating Droplets on Featureless Substrates by the Modulation of Surface Tension,” IEEE/ASME J. Microelectromechanical Systems, 18(6), pp. 1163-1172, December 2009
68
A. Basu, Y.B. Gianchandani, “Scanning Probe Thermochemical Patterning in the Context of Nano Scale Lithography,” Nature Nanotechnology, News and Views (invited article), vol. 4 pp. 622-623, doi:10.1038/nnano.2009.287, October 2009
67
Y.B. Gianchandani, S. Wright, C. Eun, C. Wilson, B. Mitra, “Exploring Microdischarges for Portable Sensing Applications,” Analytical and Bioanalytical Chemistry (ABC) Journal, (invited paper), DOI 10.1007/s00216-009-3011-6, vol. 395(3), pp. 559-575, Sept. 2009
66
S. Wright, Y.B. Gianchandani, “Contaminant Gas Removal Using Thin-Film Ti Electrode Microdischarges,” Applied Physics Letters, 95(11), article 11504, pp. 1-3, Sept. 16, 2009
65
J.M. Park, A.T. Evans, K. Rasmussen, T.R. Brosten, G.F. Nellis, S.A. Klein, and Y.B. Gianchandani, “A Microvalve with Integrated Sensors and Customizable Normal State for Low Temperature Operation,” IEEE/ASME J. Microelectromechanical Systems, 18(4), pp. 868-879, August 2009
64
S. Wright and Y.B. Gianchandani, “Discharge-Based Pressure Sensors for High Temperature Applications Using Three-Dimensional and Planar Microstructures,” Journal of Microelectromechanical Systems, 18(3), pp. 736-743, June 2009
63
S.R. Green and Y.B. Gianchandani, “Wireless Magnetoelastic Monitoring of Biliary Stents,” IEEE/ASME J. Microelectromechanical Systems, 18(1), pp. 64-78, February 2009
 
2008
62
W.F. Weitzel, C.L. Cotant, Z. Wen, R. Biswas, P. Patel, H. Panduranga, Y.B. Gianchandani, J.M. Rubin, “Analysis of Novel Geometry-independent Method for Dialysis Access Pressure-flow Monitoring,” Theoretical Biology and Medical Modelling, 5:22, (12 pp.), Nov. 2008
61
N.K. Gupta and Y.B. Gianchandani, “Thermal Transpiration in Zeolites: A Mechanism for Motionless Gas Pumps,” Applied Physics Letters, 93, pp. 193511, Oct. 2008
60
A. Basu and Y.B. Gianchandani, “Virtual Microfluidic Traps, Filters, Channels, and Pumps using Marangoni Flows,” IOPJournal for Micromechanics and Microengineering, 18 (2008) 115031(11 pp.), available online Oct. 22, 2008
59
C.K. Eun, C. Wilson, Y.B. Gianchandani, “A Bulk Silicon Micromachined Structure for Gas Microdischarge-Based Detection of Beta-Particles,” IOP Journal for Micromechanics and Microengineering, 18, (2008) 095007 (10 pp.), available online July 25, 2008
58
K. Takahata and Y. B. Gianchandani, “A Micromachined Capacitive Pressure Sensor Using a Cavity-Less Structure with Bulk-Metal/Elastomer Layers and its Wireless Telemetry Application,” Sensors, 8, pp. 2317-2330, published on-line at www.mdpi.org/sensors, April 2, 2008, ISSN 1424-8220
57
B. Mitra, B. Levey, and Y.B. Gianchandani, “Hybrid Arc/Glow Microdischarges at Atmospheric Pressure and Their Use in Portable Systems for Liquid and Gas Sensing,” IEEE Transactions on Plasma Science, in press
56
B. Mitra and Y.B. Gianchandani, “The Detection of Chemical Vapors in Air Using Optical Emission Spectroscopy of Pulsed Microdischarges from Two and Three Electrode Microstructures,” IEEE Sensors, vol. 8, no. 8, pp. 1445-1454, August 2008
55
J.M. Park, R.P. Taylor, A.T. Evans, T.R. Brosten, G.F. Nellis, S.A. Klein, J.R. Feller, L. Salerno, and Y.B. Gianchandani, “A Piezoelectric Microvalve for Cryogenic Applications,” IOP Journal for Micromechanics and Microengineering, vol. 18, no. 1, pp. 015023, January 2008
54
M.T. Richardson and Y.B. Gianchandani, “Achieving Precision in High Density Batch Mode Micro-Electro-Discharge Machining,” IOP Journal for Micromechanics and Microengineering, vol. 18, no. 1, 015002 (12 pp.), January 2008
 
2007
53
T.R. Brosten, J.M. Park, A.T. Evans, K. Rasmussen, G.F. Nellis, S.A. Klein, J.R. Feller, L. Salerno, and Y.B. Gianchandani, “A Numerical Flow Model and Experimental Results of a Cryogenic Microvalve for Distributed Cooling Applications,” Cryogenics, vol. 47, issues 9-10, pp. 501-9, September-October 2007
52
S.A. Wright and Y.B. Gianchandani, “Controlling Pressure in Microsystem Packages by On-chip Microdischarges between Thin-film Titanium Electrodes,” Journal of Vacuum Science and Technology B (Microelectronics and Nanometer Structures), 25(5), pp. 1711-1720, Sept. 2007.
51
C.G. Wilson and Y.B. Gianchandani, “Selective Deposition of Silicon at Room Temperature Using DC Microplasmas,” IEEE Transactions on Plasma Science, vol. 35, no. 3, pp. 573-577, June 2007
50
A. Basu, Y.B. Gianchandani, “Shaping High-Speed Marangoni Flow in Liquid Films By Microscale Perturbations in Surface Temperature,” Applied Physics Letters, 90, 034102, 2007
49
T. Li, R.Y. Gianchandani and Y.B. Gianchandani, “Micromachined Bulk PZT Tissue Contrast Sensor for Fine Needle Aspiration Biopsy,” Lab-on-a-Chip (IOP), 7, pp. 179-185, February 2007
  2006
48
K. Udeshi, K.-H. Liao, L. Que, Y.B. Gianchandani, and A. Galvanauskas, “Programmable Optical Wave form Shaper on a Microchip,” Applied Physics Letters, 89(3), pp. 31120 -1-3, July 17, 2006.  (This paper was also selected for the August 7, 2006 issue of Virtual Journal of Nanoscale Science & Technology.  The Virtual Journal, which is published by the American Institute of Physics and the American Physical Society in cooperation with numerous other societies and publishers, is an edited compilation of links to articles from participating publishers, covering a focused area of frontier research.  Available at http://www.vjnano.org.)
47
K. Takahata and Y.B. Gianchandani, K.D. Wise, “Micromachined Antenna Stents and Cuffs for Monitoring Intraluminal Pressure and Flow,” IEEE/ASME J. Microelectromechanical Systems, 15(5), pp. 1289-1298, October 2006
46
A. Gaitas and Y.B. Gianchandani, “An Experimental Study of the Contact Mode AFM Scanning capability of Polyimide Cantilever Probes,” Ultramicroscopy (Elsevier), 106, pp. 874-880, July 2006
45
T. Li and Y.B. Gianchandani, “A Micromachining Process for Die-Scale Pattern Transfer in Ceramics and its Application to Bulk Piezoelectric Actuators,” IEEE/ASME Journal of Microelectromechanical Systems, 15(3), pp. 605-612, June 2006
44
L.L. Chu, L. Que, A.D. Oliver, and Y.B. Gianchandani, “Lifetime Studies of Electrothermal Bent-Beam Actuators in Single- Crystal Silicon and Polysilicon,” IEEE/ASME Journal of Microelectromechanical Systems, 15(3), pp. 498-506, June 2006
43
Y. Shimamura, K. Udeshi, L. Que, J.  Park, and Y.B. Gianchandani, “Impact behavior and Energy Transfer Efficiency of Pulse-Driven Bent-Beam Electrothermal Actuators,” IEEE/ASME Journal of Microelectromechanical Systems, 15(1), pp. 101-110, February 2006
42
B. Mitra, C.G. Wilson, L. Que, P. Selvaganapathy and Y.B. Gianchandani, “Microfluidic Discharge-Based Optical Sources for Detection of Biochemicals,” Lab-on-a-Chip (IOP), 6(1), pp. 60-65, 2006
  2005
41
L.L. Chu, K. Takahata, P. Selvaganapathy, Y.B. Gianchandani, and J.L. Shohet, “A Micromachined Kelvin Probe with Integrated Actuator for Microfluidic and Solid-State Applications,” IEEE/ASME Journal of Microelectromechanical Systems, 14(4), pp. 691-698, August 2005
40
S. McNamara and Y.B. Gianchandani, “On-Chip Vacuum Generated by a Micromachined Knudsen Pump,” IEEE/ASME Journal of Microelectromechanical Systems, 14(4), pp. 741-746, August 2005
39
L. Que, C.G. Wilson, Y.B. Gianchandani, “Microfluidic Electrodischarge Devices with Integrated Dispersion Optics for Spectral Analysis of Water Impurities,” IEEE/ASME Journal of Microelectromechanical Systems, 14(2), pp. 185-191, April 2005
38
J.-H. Lee and Y.B. Gianchandani, “A Temperature Dithering Closed-Loop Interface Circuit for a Scanning Thermal Microscopy System,” IEEE/ASME Journal of Microelectromechanical Systems, IEEE/ASME Journal of Microelectromechanical Systems, 14(1), pp. 44-53, Feb. 2005
37
S. McNamara, A. Basu, J.-H. Lee, and Y.B. Gianchandani, “Ultracompliant Thermal Probe Array for Scanning Non-Planar Surfaces Without Force Feedback,” IoP Journal of Micromechanics and Microengineering.  Published electronically: 29 Oct, 04; in print form: 15(1) pp. 237-243, Jan 2005
  2004
36
K. Takahata and Y.B. Gianchandani, “A Planar Approach for Manufacturing Cardiac Stents: Design, Fabrication and Mechanical Evaluation,” IEEE/ASME Journal of Microelectromechanical Systems, 13(6), pp. 933-939, Dec. 2004
35
M.E. Zorn, C.G. Wilson, Y.B. Gianchandani, and M.A. Anderson, “Detection of Aqueous Metals Using a Microglow Discharge Atomic Emission Sensor,” Sensors Letters, vol. 2, no. 3,4, pp. 179-185, Sept.-Dec. 2004
34
A. Basu, S. McNamara, and Y.B. Gianchandani, “Scanning Thermal Lithography: Maskless, Submicron Thermochemical Patterning of Photoresist by Ultracompliant Probes,” Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 22(6) pp. 3217-3220,November 2004.  (This paper was also selected for the December 27, 2004 issue of Virtual Journal of Nanoscale Science & Technology.  The Virtual Journal, which is published by the American Institute of Physics and the American Physical Society in cooperation with numerous other societies and publishers, is an edited compilation of links to articles from participating publishers, covering a focused area of frontier research. Available at http://www.vjnano.org.)
33
J.-H. Lee and Y.B. Gianchandani, “High-resolution Scanning Thermal Probe with Servocontrolled Interface Circuit for Microcalorimetry and Other Applications,” Review of Scientific Instruments, 75 (5), 1222-1227, May 2004 (This paper was also selected for the May 3, 2004 issue of Virtual Journal of Nanoscale Science & Technology.  The Virtual Journal, which is published by the American Institute of Physics and the American Physical Society in cooperation with numerous other societies and publishers, is an edited compilation of links to articles from participating publishers, covering a focused area of frontier research. Available at http://www.vjnano.org.)
32
S.P. McNamara and Y.B. Gianchandani, “LIGA Fabricated 19-Element Threshold Accelerometer Array,” Sensors and Actuators, A (Physical), 112(1), pp. 175-183, April 2004
31
C.G. Wilson and Y.B. Gianchandani, “Miniaturized Magnetic Nitrogen DC Microplasmas” IEEE Transactions on Plasma Science, 32(1), pp. 282-297, Feb. 2004
  2003
30
C.G. Wilson, Y.B. Gianchandani, and A.E. Wendt, “High Voltage Constraints for Vacuum Packaged Microstructures,” IEEE/ASME Journal of Microelectromechanical Systems, 12(6), pp. 835-9, Dec. 2003
29
Q. Luo, S. Mutlu, Y.B. Gianchandani, F. Svec, J.M.J. Fréchet, “Monolithic Valves for Microfluidic Chips Based on Thermoresponsive Polymer Gels,” Electrophoresis, 24, pp. 3694-3702, Nov. 2003
28
C.G. Wilson, Y.B. Gianchandani, R.R. Arslanbekov, V. Kolobov, and A.E. Wendt, “Profiling and Modeling of DC Nitrogen Microplasmas,” Journal of Applied Physics, 94(5), pp. 2845-2851, Sept. 2003
27

K. Thompson, J.H. Booske, R.F. Cooper, and Y.B. Gianchandani, “Electromagnetic Fast Firing for Ultrashallow Junction Formation,” IEEE Transactions on Semiconductor Manufacturing, 16(3), pp. 460-468, August 2003

26
A.D. Oliver, S.R. Vigil, and Y.B. Gianchandani, “Photothermal Surface-Micromachined Actuators,” Brief Communication, IEEE Transactions on Electron Devices, 50(4), pp. 1156-1157, April 2003
25

M.-H. Li and Y.B. Gianchandani, “Applications of a Low Contact Force Polyimide Shank Bolometer Probe for Chemical and Biological Diagnostics,” Sensors and Actuators, A (Physical), 104, pp. 236-245, April 2003

24

J.-S. Park and Y.B. Gianchandani, “A Servo-Controlled Capacitive Pressure Sensor Using a Capped-Cylinder Structure Microfabricated by a Three-Mask Process,” IEEE/ASME Journal of Microelectromechanical Systems, 12(2), pp. 209-220, April 2003

23
L.L. Chu and Y.B. Gianchandani, “A Micromachined 2D Positioner with Electrothermal Actuation and Sub-Nanometer Capacitive Sensing,” IOPJournal for Micromechanics and Microengineering, 13(2), pp. 279-285, March 2003
  2002
22
K.J. Ma, Y.B. Gianchandani, and K. Najafi, “The Active Dissolved Wafer Process (ADWP) for Integrating Single Crystal Si MEMS With CMOS Circuits, Journal of Semiconductor Technology and Science, 2(4), pp. 273-9, Dec. 2002
21
C.G. Wilson and Y.B. Gianchandani, “Spectral Detection of Metal Contaminants in Water Using an On-Chip Microglow Discharge,” IEEE Transactions on Electron Devices, 49(12) pp. 2317-22, Dec. 2002
20
L.L. Chu, L. Que, and Y.B. Gianchandani, “Measurements of Material Properties Using Differential Capacitive Strain Sensors,” IEEE/ASME Journal of Microelectromechanical Systems, 11(5), pp. 489-498, October 2002
19
K. Thompson, Y.B. Gianchandani, J. Booske, and R. Cooper, “Direct Silicon-Silicon Bonding by Electromagnetic Induction Heating,” IEEE/ASME Journal of Microelectromechanical Systems, 11(4), pp. 285-292, August 2002
18
K. Takahata and Y.B. Gianchandani, “Batch Mode Micro-Electro-Discharge Machining” IEEE/ASME Journal of Microelectromechanical Systems, 11(2), pp. 102-110, April 2002
17
L.L. Chu, J.A. Hetrick, and Y.B. Gianchandani, “High Amplification Compliant Microtransmissions for Rectilinear Electrothermal Actuators,” Sensors and Actuators, A (Physical), vol. A 97-98, pp. 776-783, April 2002
16
K. Thompson, J. Booske, Y.B. Gianchandani, and R. Cooper, “Electromagnetic annealing for the 100 nm technology node,” IEEE Electron Device Letters, 23(3), pp. 127-129, March 2002
  2001
15
J.-S. Park, L.L. Chu, A.D. Oliver, and Y.B. Gianchandani, “Bent-Beam Electrothermal Actuators – Part II: Linear and Rotary Microengines,” IEEE/ASME Journal of Microelectromechanical Systems, 10(2), pp. 255-262, June 2001
14
L. Que, J.-S. Park and Y.B. Gianchandani, “Bent-Beam Electrothermal Actuators – Part I: Single Beam and Cascaded Devices,” IEEE/ASME Journal of Microelectromechanical Systems, 10(2), pp. 247-254, June 2001
13
C.G. Wilson and Y.B. Gianchandani, “Silicon Micromachining Using In Situ DC MicroPlasmas,” IEEE/ASME Journal of Microelectromechanical Systems, 10(1), pp. 50-54, March 2001
12
M.-H. Li, J.J. Wu, and Y.B. Gianchandani, “Surface Micromachined Polyimide Scanning Thermocouple Probes,” IEEE/ASME Journal of Micro-electromechanical Systems, 10(1), pp. 3-9, March 2001
  2000
11
L. Que and Y.B. Gianchandani, “Mechanical Properties and Pattern Collapse of Chemically Amplified Photoresists,” Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 18(6), pp. 3450-2, Nov./Dec. 2000
10
M.-H. Li and Y.B. Gianchandani, “Microcalorimetry Applications of a Surface Micromachined Bolometer-type Thermal Probe,” Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 18(6), pp. 3600-3, Nov./Dec. 2000
9
J.-S. Park and Y.B. Gianchandani, “A Capacitive Absolute-pressure Sensor with External Pick-off Electrodes” IOP Journal for Micromechanics and Microengineering, 10(4), pp. 528-533, Dec. 2000
8
Y. Gianchandani, H. Kim, M Shinn, B. Ha, B. Lee, K. Najafi, and C. Song, “A Fabrication Process for Integrating Polysilicon Microstructures with Post-Processed CMOS Circuits,” IOP Journal for Micromechanics and Microengineering, 10(3), pp. 380-386, Sept. 2000
  1999 and Earlier
7
L. Que, Y. Gianchandani, and F. Cerrina, “Mechanical Characterization of E-Beam Resist Using Micromachined Structures,” Journal of Vacuum Science and Technology B: Microelectronics and Nanostructures, 17(6), Nov/Dec, 1999, pp. 2719-22
6
Y. Gianchandani and S. Crary, “Parametric Modeling of a Microaccelerometer: Comparing I- and D-Optimal Design of Experiments for Finite-Element Analysis,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 7, no. 2, pp. 274-282, June 1998
5
Y. Gianchandani, M. Shinn, and K. Najafi, “Impact of High Thermal Budget Anneals on Polysilicon as a Micromechanical Material,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 7, no. 1, pp. 102-105, March 1998
4
Y. Gianchandani and K. Najafi, “A Silicon Micromachined Scanning Thermal Profiler with Integrated Elements for Sensing and Actuation,” IEEE Transactions on Electron Devices, 44 (11), Nov. 1997, pp. 1857-68
3
Y. Gianchandani and K. Najafi, “Bent-Beam Strain Sensors,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 5, no. 1, pp. 52-58, March 1996
2
Y. Gianchandani and K. Najafi, “Batch Assembled Multi-Level Micromachined Mechanisms from Bulk Silicon,” IOPJournal for Micromechanics and Microengineering, vol. 2, pp. 80-85, 1992
1
Y. Gianchandani and K. Najafi, “A Bulk Silicon Dissolved Wafer Process for Microelectromechanical Devices,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 1, no. 2, pp. 77-85, June 1992